[1]GUI Fangzhi,REN Shedong,ZHAO Yanwei,et al.Product innovation design using the modified third creation method[J].CAAI Transactions on Intelligent Systems,2017,12(1):38-46.[doi:10.11992/tis.201610016]
Copy
Product innovation design using the modified third creation method
CAAI Transactions on Intelligent Systems[ISSN 1673-4785/CN 23-1538/TP] Volume:
12
Number of periods:
2017 1
Page number:
38-46
Column:
学术论文—智能系统
Public date:
2017-02-25
- Title:
- Product innovation design using the modified third creation method
- Keywords:
- third creation method; affair model; functional analysis; cause effect chain analysis; innovative design
- CLC:
- TP18;TH122
- DOI:
- 10.11992/tis.201610016
- Abstract:
- Due to the deficiency of product modeling and defect listing in the third creation method, a modified third creation method of Extenics was proposed using the affair model, and the functional analysis and cause-effect chain analysis were introduced. The product defects were found by functional analysis and the underlying cause can be determined by the cause-effect chain analysis. Then, the key defects were determined. Finally, the defects were resolved using the modified third creation method and a new product was formed with many design schemes. Also, new bolt cutters were designed by selecting the optimum scheme, and they proved the feasibility and effectiveness of the method.
- References:
-
[1] 檀润华. 产品创新设计若干问题研究进展[J]. 机械工程学报, 2003, 39(9): 11-16. TAN Runhua. Progress of some problems in product design for innovation[J]. Chinese journal of mechanical engineering, 2003, 39(9): 11-16.
[2] 李彦, 李翔龙, 赵武, 等. 融合认知心理学的产品创新设计方法研究[J]. 计算机集成制造系统, 2005, 11(9): 1201-1207. LI Yan, LI Xianglong, ZHAO Wu, et al. Research on product creative design with cognitive psychology[J]. Computer integrated manufacturing systems, 2005, 11(9): 1201-1207.
[3] 赵燕伟, 苏楠. 可拓设计[M]. 北京: 科学出版社, 2010.
[4] 赵燕伟, 周建强, 洪欢欢, 等. 可拓设计理论方法综述与展望[J]. 计算机集成制造系统, 2015, 21(5): 1157-1167. ZHAO Yanwei, ZHOU Jianqiang, HONG Huanhuan, et al. Overview and prospects of extension design methodology[J]. Computer integrated manufacturing systems, 2015, 21(5): 1157-1167.
[5] 陈建, 赵燕伟, 李方义, 等. 基于转换桥方法的产品绿色设计冲突消解[J]. 机械工程学报, 2010, 46(9): 132-142. CHEN Jian, ZHAO Yanwei, LI Fangyi, et al. Transforming bridge-based conflict resolution for product green design[J]. Journal of mechanical engineering, 2010, 46(9): 132-142.
[6] LIAO Yongqiang, YANG Chunyan, LI Weihua. Extension innovation design of product family based on Kano requirement model[J]. Procedia computer science, 2015, 55: 268-277.
[7] 杨春燕, 蔡文. 可拓学[M]. 北京: 科学出版社, 2014.
[8] 蔡文, 杨春燕, 林伟初. 可拓工程方法[M]. 北京: 科学出版社, 1997.
[9] 何文波, 刘丽萍. 基于缺点列举法的产品设计[J]. 河南科技大学学报: 社会科学版, 2006, 24(2): 70-72. HE Wenbo, LIU Liping. Product design based on enumerating defect[J]. Journal of Henan university of science and technology: social science, 2006, 24(2): 70-72.
[10] 龙书芹. 论默顿的功能分析范式[J]. 广西社会科学, 2006(2): 175-177. LONG Shuqin. Causal analysis and functional analysis in the sociological research-the status of causal analysis in Robert K. Merton’s paradigm[J]. Guangxi social sciences, 2006(2): 175-177.
[11] SHIMODA Y, NARUMI D, MIZUNO M. Environmental impact of urban heat island phenomena-cause-effect chain and evaluation in Osaka City—[J]. Journal of Life Cycle Assessment, Japan, 2005, 1(2): 144-148.
[12] 杨春燕. 新产品构思的第三创造法[J]. 广东工业大学学报, 1997, 14(1): 25-30. YANG Chunyan. Third way of creation in new product conception[J]. Journal of Guangdong university of technology, 1997, 14(1): 25-30.
[13] 齐宁宁, 杨春燕. 基于可拓学第三创造法的产品概念设计[J]. 数学的实践与认识, 2015(5): 226-238. QI Ningning, YANG Chunyan. Product conceptual design based on third creative method of Extenics[J]. Mathematics in practice and theory, 2015(5): 226-238.
[14] 孙永伟, 谢尔盖·伊克万科. TRIZ打开创新之门的金钥匙Ⅰ[M]. 北京: 科学出版社, 2015.
[15] 钱炜苗, 吕凤吹, 王耘, 等. 功能分析与约束理论集成驱动产品改进设计研究[J]. 机械设计, 2011, 28(9): 1-5.QIAN Weimiao, LV Fengchui, WANG Yun, et al. Research on improvement design of FA and TOC integrated drive product[J]. Journal of machine design, 2011, 28(9): 1-5.
[16] 卢希美, 张付英, 张青青. 基于TRIZ理论和功能分析的产品创新设计[J]. 机械设计与制造, 2010(12): 255-257. LU Ximei, ZHANG Fuying, ZHANG Qingqing. Product innovation design based on the theory of TRIZ and functional analysis[J]. Machinery design & manufacture, 2010(12): 255-257.
[17] 蔡敢为, 潘宇晨, 王红州, 等. 基于功能分析的新型装载机构型综合研究[J]. 机械工程学报, 2014, 50(11): 50-59. CAI Ganwei, PAN Yuchen, WANG Hongzhou, et al. Functional analysis based type synthesis of a novel type of loading mechanisms[J]. Journal of mechanical engineering, 2014, 50(11): 50-59.
[18] DOBRUSSKIN C. On the identification of contradictions using cause effect chain analysis[J]. Procedia CIRP, 2016, 39: 221-224.
[19] ABRAMOV O, KOGAN S, MITNIK-GANKIN L, et al. TRIZ-based approach for accelerating innovation in chemical engineering[J]. Chemical engineering research and design, 2015, 103: 25-31.
[20] ZELLER A. Isolating cause-effect chains from computer programs[C]//Proceedings of the 10th ACM SIGSOFT Symposium on Foundations of Software Engineering. New York, USA, 2002: 1-10.
[21] 贾仁安, 沈小龙. 系统运行全部反馈环关键因果链分析法——以转型期火力发电系统实践为例[J]. 系统工程理论与实践, 2014, 34(10): 2675-2687. JIA Ren’an, SHEN Xiaolong. Analysis Method of system running by key causal chains of all feedback loops-An example to practice for the coal-power system in the transferring period[J]. Systems engineering-theory & practice, 2014, 34(10): 2675-2687.
[22] 夏小玲, 刘伟平. 液压断线钳与普通断线钳剪切痕迹的检验及应用[J]. 中国司法鉴定, 2010(5): 52-55. XIA Xiaoling, LIU Weiping. Cutting marks made by hydraulic cutter and bolt cutter[J]. Chinese journal of forensic sciences, 2010(5): 52-55.
- Similar References:
Memo
-
Last Update:
1900-01-01